| Objects | page : 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62 63
64
65
66
67
68
69
|
|
tl.tremolo~
| Abstraction |
   |
Add tremolo (amplitude modulation) to a signal. |
|
tl.viewsound~
| Abstraction |
|
Simple real-time sound wave display using two multisliders |
|
tl.vst.helper
| Abstraction |
|
GUI helper for vst~.
Incorporates common messages (plug, bypass, etc.), a simple way of polling and dumping all parameters for storage in embedded coll file, pattr implementation as list of all parameters (max 256) and reporting changes to single parameters. |
|
tm.biquad
| Abstraction |
|
Sets up filters using biquad~. |
|
tm.vsti-init
| Abstraction |
|
A simple VST plugin that passes audio thru, however is required to initialize all vst~ objects if you wish to use them at some point as VST instruments. |
|
tone1~
| Abstraction |
|
low-budget tone control
This low-budget tone control uses coef_hlshelf2~ to provide easy "home stereo style" 3- band graphic EQ for low mid-range and high frequencies. The cut or boost for the three segments is defined in decibels (positive for a boost/gain, and negative for a cut/attenuation). Remember that a signal’s amplitude is doubled when it is boosted by 6 dB and halved when it is attenuated by 6 dB. |
|
train.shift~
| External |
|
pulse signals like train~
Outputs pulse signals like 'train~' with evenly-spaced phase relationships between the outlets. |
|
train~
| External |
|
Pulse-train generator and metronome
Pulse-train generator and metronome. train~ generates a pulse signal whose period is specifiable in terms of milliseconds (see <~ for a method of making a pulse wave at a specified frequency). It also sends out a bang when going from 0 to 1, so it can be used as a metronome with a floating-point interval. The signal output can be used as a control input for sah~ as shown in the example below, or at very small intervals, it is audible. |
|
trend-report
| External |
 |
Given an input stream of numbers, report statistics on "trends", i.e., series of increasing or decreasing values.
This was originally used on the output of fiddle~ as part of the "laughter" detector for Edmund Campion's "ME". |
|
triangle~
| External |
|
triangle~ is a triangle/ramp wavetable with signal input to change phase offset of the peak value.
triangle~ is a triangle/ramp wavetable with signal input to change phase offset of the peak value. The default lo/hi points are -1. and 1., but may be changed using the lo/hi messages. |
|
tri~
| External |
|
A triangle oscillator with anti-aliasing. |
|
tromp~
| External |
|
Advanced physical model of a trumpet after Vergez.
Distribution/licence: IRCAM |
|
trunc~
| External |
|
Truncate fractional part of signal values
Truncate fractional part of signal values. trunc~ converts signals with values such as 1.75 to 1.0. Negative values are modified so that -1.75 becomes -1.0. This object is very simple but computationally expensive. |
|
ttoms
| Abstraction |
|
Calculate ms out of hours, minute, seconds.
It will also define cues for sfplay~ and if you want, you can start them with the middle outlet. |
|
unmute~
| Abstraction |
|
|
| page : 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62 63
64
65
66
67
68
69
|
