Objects			page : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
speedlim	External		Limit the speed of messages passing through Limit the speed with which messages can pass through.Speedlim takes one optional argument which is a speedlimiting time in milliseconds. The left inlet takes any message and outputs it according to the argument value. The right inlet takes int to change the speedlimiting time.
split	External		Look for a range of numbers Look for a range of numbers.Split takes an 'int' and puts it out the left outlet if the value is inclusively between the two argument values, otherwise it puts it out the right outlet.
splitter	Abstraction		Passes smaller values out the left, equal values out the middle and bigger values out the right outlet.
St.Average	Abstraction		Each input will cause an output which is the average of the last n input values.
St.IncDec	Abstraction		Increment or decrement a value with bangs.
St.Last	Abstraction		Picks only the last value which came in to its input.
St.mooth	Abstraction		Smooths out jumping values.
St.moothLim	Abstraction		Almost like St.mooth, but instead of a time to reach the end value, it will step with the given time by one to the end value.
St.Quant	Abstraction		Quantize incoming values
stack	External		stack is an implementation of push-down stacks, also known as LIFO (last-in, first-out) queues. stack is an implementation of push-down stacks, also known as LIFO (last-in, first-out) queues. Unlike conventional stacks, the stack object can store lists as well as single values on each level.
swap	External		Swap left and right inlets to outlets Swap swaps the values of its inlets, preserving right-to-left ordering. The first outlets (and second inlets) type follow the argument (or is an int if you give no argument.) The second outlets (and first inlets) type is int or float depending on whether you use the name "swap" or "fswap".
swap	External		Swap left and right inlets to outlets, reverse the sequential order of two numbers Swap swaps the values of its inlets, preserving right-to-left ordering. The first outlets (and second inlets) type follow the argument (or is an int if you give no argument.) The second outlets (and first inlets) type is int or float depending on whether you use the name "swap" or "fswap".
t.ain	External		Read values from Analog-in terminal
t.dout	External		Writes values to digital-out terminal of Digital Out Module.
t.intro.ain	External		Read values from the Intro module's Analog-in terminal.
page : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Libraries
BulkStore	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='62'Tom Mays	bulk storage memory device for all values (any message)
FuzzyLib	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='139'Alain Bonardi Isis Truck	When manipulating human knowledge such as perception, feelings, appreciation, veracity of facts, etc., the classical logic that recognize only two truth degrees (true or false) is not always the most suitable. To solve this problem, more than two degrees are considered in the non-classical logics. The fuzzy logic is one of these logics. In this logic, facts are represented through membership functions: when the membership value is equal to 1 the fact is exactly true; when it is equal to 0 the fact is exactly false; in between there is an uncertainty about the veracity of the fact. These membership functions are called "fuzzy subsets". They can be of different shapes: gaussian, trapezoidal, triangular, etc. Thus the aim of the fuzzy logic is to propose a theoretical framework for the manipulation - representation and reasoning - of such facts. The Fuzzy Lib library implements all the tools that are necessary to handle this manipulation: representation of a fuzzy subset (among them are the fuzzification, defuzzification and partitioning), reasoning process (generalized modus ponens, fuzzy implications, t-norms, t-conorms, etc.). This version 1 of the Fuzzy Lib enables to implement fuzzification, uncertain reasoning and defuzzification for any number of data in the framework of Max/MSP environment.
Litter Power Pro Package	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='54'Peter Castine	The Litter Power package consists of over 60 external objects, including a number of new MSP noise sources, externals that produce values from a wide variety of random number distributions, and externals for mutation and cross-synthesis.
p.jit.gl.tools	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='123' Pelado	the p.jit.gl tools are designed to provide for easier learning of and experimenting with the many attributes that are available to jitter's gl objects by making them a whole lot more transparent and accessible. patches expose jitter gl object's attributes to interfaces that allow you to immediately edit and change an attribute's value. many of the parameters are attached to blines, which provide smooth changes while rendering, and all settings can be saved and recalled as presets using the pattrs that are embedded in the patches.
Panaiotis Objects	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='122' Panaiotis	The Mac version is UB. These Max objects have been enhanced since the documentation to the left was written. Help files for the objects provide information on enhancements. The matrix object has been substantially upgraded. It now combines features of unpack, spray, funnel, append, and prepend into one object. This makes a great object to place between controllers and jit objects because it acts like a multi-prepend. There are new configuration commands and enhancements to the old: even, odd, mod,and range, among others). Most commands can be applied to inlets of outlets. There is also a mute function that adds another layer of control. Matrixctrl support has been enhanced. See the help file for full details and examples. Most other objects now fully support floats. RCer and autocount will count in float values, not just integers. Notegen16 is a 16 channel version of its predecessor: notegen. It is more generalized and much more efficient.
SFA Max/MSP Library	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='172'Stefano Fasciani	The SFA-MaxLib is a collection of Max/MSP objects developed in the context of the VCI4DMI. It includes functions and utilities in the form of FTM externals, FTM abstractions and Max abstractions. FTM is a shared library for Max/MSP developed by IRCAM, which provides a small and simple real-time object system and a set of optimized services to be used within Max/MSP externals. List of FTM Externals: sfa.eig - eigenvalues; sfa.inputcombinations - combination generator; sfa.levinson - levinson-durbin recursion; sfa.lpc2cep - lpc to cepstra conversion; sfa.rastafilt - rasta filter; sfa.rmd - relative mean difference; sfa.roots - polynomial roots; List of Abstractions: sfa.bark.maxpat - energy of the Bark bands from time domain frame;sfa.bark2hz_vect.maxpat - Herts to Bark conversion;sfa.barkspect.maxpat - energy of the Bark bands from spectrum; sfa.ceil.maxpat - ceil function; sfa.featfluxgate.maxpat - gated distance on stream of feature vectors; sfa.fft2barkmx.maxpat - utility sub-abstraction of sfa.bark; sfa.fft2barkmxN.maxpat - utility sub-abstraction of sfa.barkspect; sfa.hynek_eq_coeff.maxpat - hynek equalization coefficients; sfa.hz2bark.maxpat - Hertz to Bark conversion; sfa.hz2bark_vect.maxpat - Hertz to Bark conversion for vectors; sfa.hz2mel.maxpat - Hertz to Mel conversion; sfa.idft_real_coeff.maxpat - utility sub-abstraction of sfa.rasta-plp; sfa.maxminmem.maxpat - minimum and maximum of a stream of data; sfa.mfcc.maxpat - MFCC coefficients; sfa.modalphafilter.maxpat - 1st order IIR lowpass on a stream of vectors; sfa.nonlinfeqscale.maxpat - linear spectrum to Bark or Mel scale conversion; sfa.rasta-plp.maxpat - PLP and RASTA-PLP coefficients; sfa.spectmoments.maxpat - 4 spectral moments (centroid, deviation, skewness, kurtosis); sfa.3spectmoments+flatness.maxpat - 3 spectral moments (centroid, deviation, skewness) and the spectral flatness; sfa.spectralflux.maxpat - spectral flux on stream of spectrum vectors; sfa.spectralfluxgate.maxpat - gated spectral flux on stream of spectrum vectors; sfa.std.maxpat - standard deviation; sfa.win_to_fft_size.maxpat - smaller FFT size given frame size; sfa.GCemulator.maxpat – 3D gestural controller emulator;
suivi	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='88' Ircam	Two externals performing score following on soloist performances using Hidden Markov Models (HMM) Suivi is based on FTM and requires the shared library FTMlib for Max/MSP. Both externals use an FTM track object - a sequence of time-tagged FTM values - to store the score of the soloist performance to be followed. Notes, trills and other elements of the score are represented by FTM score objects (FTM scoob class). For the moment, scores can be imported from standard MIDI files only. An editor for the FTM track class, which will also provide a graphical control interface for the score follower is under development as well as the import of MusicXML files. The suivi object set is distributed within the IRCAM Forum.