what :
Home > Search > poly~

Objectspage : 1
ajm.busymap Abstraction visualization of poly~ busymap
ajm.polyroute Abstraction route messages to poly~ targets with OSC syntax
Depends on the OSC-route object (http://cnmat.berkeley.edu/downloads)
fc.BP.Link Abstraction link the masses create with the poly-B.P.particule2
include in a poly~object, permitted to make different links between the masses create with the poly-B.P.particule2
flushp Abstraction flush is not only flushing, its also unpacking. For those cases where you'd need to pack the values again, like for poly~s, flushp does this.
in External Define a message input in a patcher loaded by poly~
in~ External Define a signal input in a patcher loaded by poly~
out External Define a message output in a patcher loaded by poly~
out~ External Define a signal output in a patcher loaded by poly~
Poly-B.P.particule2 Abstraction used with pmpd 2D objects, create/delete mass, control, bounds, collision detection & receive
abstraction include in a poly~ object for create/delete mass in a limited space, control physics properties by group or individual, and receive values.
polyline Abstraction non-audio use of poly~
poly~ External Polyphony and DSP manager for patchers
Simple FM Synth Patch A simple FM synthesize patch
First off, I should mention that the name is a bit of a misnomer. There are really two layers, the titular simple FM layer, and a subtractive synth layer. Simple FM Synth is nothing fancy, but I think it sounds pretty good, for what it is. This patch started off as a basic sound source to enable me to work on the Gyre program that I use with my Buchla 200e, when I was not near my Buchla.

There are two main patches of interest, Simple_FM_Synth.maxpat, and Simple_FM_Synth_Test.maxpat. Simple_FM_Synth is what you'll use in your patches, and Simple_FM_Synth_Test is an example of ways to use it. Simple_FM_Synth_Test has a simple note generator that plays randomish notes so that you can start it playing, and then mess with the parameters of Simple_FM_Synth itself.

The FM section is a simple two-operator stack, nothing fancy here. There are a couple redundant ways to set the relationship of the FM carrier and FM modulator.

The Subtractive section consists of two oscillators, one square/pw, and one sawtooth, mixed into a filter. Even though the poly~ patch "FMSynthVox.maxpat", as delivered, uses svf~, the presets were written using 2up_svf~ instead. 2up_svf~ sounds better than the stock svf~, in my opinion, but it is only available for the Mac, so I used the stock object for this distribution. The presets are somewhat different sounding with the stock svf~. If you are on a Mac, I highly recommend grabbing 2up_svf~ from here, and editing FMSynthVox to use it.

Chris Muir
thispoly~ External Reports poly~ instance number, controls voice allocation and muting
page : 1

4838 objects and 135 libraries within the database Last entries : May 10th, 2017 Last comments : 0 0 visitor and 2949960 members connected RSS
Site under GNU Free Documentation License