Objects			page : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62
binop1 + - * /	External		Arithmetic operators + - * / The arithmetic operations: addition (+), subtraction (-), multiplication (*), and division (/), can be defined as either floating point or integer following the argument's type. The argument is optional for integer arithmetic. The right inlet acts to change the argument value but causes no output. The left inlet introduces the other operand and causes output to be produced. Bang (at left) causes output without changing either value.
bline	External		bang-based multi-segment line object The bline object is an event-driven version of the Max line object. It takes a breakpoint list of [target] [time_to_target] pairs and 'tweens' appropriately to generate a smooth function. The major difference is that the bline object is driven by bang messages sent to its left inlet instead of being driven by the Max scheduler. This gives the object a flexible timebase, which is useful when working with events that have a variable processing time (such as rendering matrices in Jitter). As with the line object, the bline object sends a bang out the object's right outlet when the current ramp is finished. It works with integer and floating point numbers, can be stopped (with the stop message), and can use multi-segment lists (unlike Max line, but in keeping with the MSP equivalent, line~).
block-bang	Abstraction		Filters out bangs that arrive before a certain time span ("blocking time") is over.
bogus	External		non-existent object The bogus object is created when Max cannot find the definition of an object in a patch being read from a file. The object has as many inlets and outlets as are needed to preserve existing connections, in case the name of an object has changed or the file that defines the object can be moved to a folder where Max can find it. You can retype the name to try to recreate the object again.
bondo	External		Synchronize a group of messages Output a set of inputs when any input is received
boner~	External		poke it in and peek it out
borax	External		Report information about note-ons and note-offs Report current information about note-ons and note-offs
bounce	External		if input value goes outside range, excess bounces back from limit
bpm	External		A simple patch that converts float and integer to a bpm value for metro. Use between integer/float (right inlet) and metro. Left input requires a bang to make the calculation. Only works in common time. For example set Integer to 120bpm, metro will output 500ms.
brown-melody	Abstraction		Generates a brownian-mouvement-like melody Generates a brownian-mouvement-like melody within a given ambitus. The distance between two notes is determined by the brownian factor <0-1>. When this factor is 1, each note of the given range can be choosen. When the rate is O, the same note will be always repeated. The right outlet shows the chosen interval.
brown-rhythm	Abstraction		Generates a brownian-movement-like rhythm Generates a brownian-movement-like rhythm of a geometrical row of entry delays (ED) between a minimum and a maximum entry delay and a certain number of ED-values. The brownian factor determines the distance between two succeding rhythmical values. A factor of 0 produces a periodic rhythm, wheras a factor of 1 will output random values of the given range.
brownian	Abstraction		random based object Random generator based on ¬brownian movements". Outputs random numbers between min and max excluding max. The distance between two random numbers is determined by the brownian factor . When this factor is 1, "brownian" behaves like an ordinary random generator. When the factor is O, always the same number is repeated.
bucket	External		An n-stage shift register Pass a number from outlet to outlet, out each one in turn 1 comment
budda	Abstraction		budda is buddy but works also with bangs. Maximum number of in/outs is 16
buddy	External		Synchronize input from different sources Synchronize arriving data, output them together
page : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62

Libraries
ag.graular.suite	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='166'Adrian Gierakowski	The ag.granular.suite is a collection of Max/MSP patches for generalised granular sound processing and microsound composition written using FTM/Gabor libraries (developed at IRCAM) and encapsulated as Jamoma modules. Main features include: subsample accurate scheduling, multichannel output, granulation of multiple soundfiles at the same time (with interpolation of two sources per grain), parameter randomisation and sequencing, control via OSC, preset management, preset interpolation. Its modular architecture makes it possible to easily extend it with new algorithms for grain scheduling and parameter control.
AHRS Max Library	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='168'Giuseppe Torre	The AHRS Library (Attitude Heading Reference System) is a set of Max externals that allows you to perform a series of basic calculations for 3D/4D vectorial math used in aerodynamics. If you are using a three axis accelerometer and a three-axis magnetometer check out the"ahrs_triad" object which enables you to find the orientation of your cluster of sensor with respect to the Earth fixed coordinates.
boids	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='112' Jasch Sier Eric Singer Wesley Smith	Based on Simon Fraser's implementation of Craig Reynolds' Boids algorithm. Boids is free for non-commercial use. Boids is a bird flight and animal flock simulator. It is based on the same algorithm which was used in Jurassic Park for the herding dinosaurs. Boids takes an integer argument which is the number of boids. Each time Boids receives a bang, it calculates and outputs the new positions of the boids. The output consists of thew coordiantes for each boid, the number and type depending on the mode. The flight parameters can be changed with messages. Use the 'dump' message to output a list of the current parameter settings. For more information about the Boids algorithm, see Craig Reynolds' Web site at "http://reality.sgi.com/employees/craig/boids.html".
cv.jit	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='19'Jean-Marc Pelletier	cv.jit is a collection of max/msp/jitter tools for computer vision applications. The goals of this project are to provide externals and abstractions to assist users in tasks such as image segmentation, shape and gesture recognition, motion tracking, etc. as well as to provide educational tools that outline the basics of computer vision techniques.
FuzzyLib	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='139'Alain Bonardi Isis Truck	When manipulating human knowledge such as perception, feelings, appreciation, veracity of facts, etc., the classical logic that recognize only two truth degrees (true or false) is not always the most suitable. To solve this problem, more than two degrees are considered in the non-classical logics. The fuzzy logic is one of these logics. In this logic, facts are represented through membership functions: when the membership value is equal to 1 the fact is exactly true; when it is equal to 0 the fact is exactly false; in between there is an uncertainty about the veracity of the fact. These membership functions are called "fuzzy subsets". They can be of different shapes: gaussian, trapezoidal, triangular, etc. Thus the aim of the fuzzy logic is to propose a theoretical framework for the manipulation - representation and reasoning - of such facts. The Fuzzy Lib library implements all the tools that are necessary to handle this manipulation: representation of a fuzzy subset (among them are the fuzzification, defuzzification and partitioning), reasoning process (generalized modus ponens, fuzzy implications, t-norms, t-conorms, etc.). This version 1 of the Fuzzy Lib enables to implement fuzzification, uncertain reasoning and defuzzification for any number of data in the framework of Max/MSP environment.
imp.dmx	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='157'David Butler	imp.dmx is a cross-platform collection of Max/MSP/Jitter abstractions for dealing with DMX data in various forms. It focuses around the use of jitter matrices to store data, which the objects then read and write to. The aim is to provide the bridge between your patch and whatever object or method you use to output DMX from Max. The abstractions use native Max objects only, excepting the Art-Net patches which use some custom java networking objects, included in the distribution package. If you have any questions or suggestions, please contact me at david@theimpersonalstereo.com. Check for updates at http://www.theimpersonalstereo.com.
int.lib	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='97'Oli Larkin	int.lib is a set of abstractions/javascripts that lets you interpolate between different presets by navigating a 2D graphical environment. It's similar in concept to the Audiomulch Metasurface, Color blobs and the Hipnoscope but implements a gravitational system, allowing you to represent presets with variable sized balls. As you move around the space, the size of the balls and their proximity to the mouse cursor affects the weight of each preset in the interpolated output.
Litter Power Starter Package	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='53'Peter Castine	The Litter Power Starter Pack consists of about two dozen external objects, including a number of new MSP noise sources, a wide variety of random number distributions, time-domain mutation, and several very useful utilities.
MaxAlea	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='96'Carl Faia	MaxAlea contains various objects for random distributions and functions. MaxAlea was begun as a Max port of an existing PatchWork Library created in 1991-2 by Mikhail Malt. While the distributions and functions found in MaxAlea are similar to those found in the Patchwork version ,there are many differences in their functioning. The environment of Patchwork is static and is not designed for real-time work. Part of the incentive for creating these objects to work with Max was to have a dynamic and real-time environment with which to experiment and work with these algorithms in a manner as simple and straightforward as possible. One can change variables and manipulate the output in many ways in real-time. There are several different versions of the various stochastic models/processes best presented in the now classic references by Denis Lorrain and Charles Dodge. Carl Faia has used a variety of sources for the creation of this library which include the Lorrain, Dodge and Malt implementations as well as sources found on the WorldWideWeb. The externals found in the package include several random distributions, examples of random walks and 1/f noise algorithms, as well as one or two utilities written specifically for the MaxAlea library. Carl Faia wanted to make a coherent collection (as he thought Malt had managed to do in PatchWork) of these various algorithms and provide an interface easily accessible using the Max environment for real-time control. All these algorithms have been created using a seeded version of the random function found in the standard AINSI library. That is, each time the function is first run there will always be a different set of random numbers (unlike the random funtions found in Max, PatchWork and other versions of random number generators).
Panaiotis Objects	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='122' Panaiotis	The Mac version is UB. These Max objects have been enhanced since the documentation to the left was written. Help files for the objects provide information on enhancements. The matrix object has been substantially upgraded. It now combines features of unpack, spray, funnel, append, and prepend into one object. This makes a great object to place between controllers and jit objects because it acts like a multi-prepend. There are new configuration commands and enhancements to the old: even, odd, mod,and range, among others). Most commands can be applied to inlets of outlets. There is also a mute function that adds another layer of control. Matrixctrl support has been enhanced. See the help file for full details and examples. Most other objects now fully support floats. RCer and autocount will count in float values, not just integers. Notegen16 is a 16 channel version of its predecessor: notegen. It is more generalized and much more efficient.
PMPD	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='81'Cyrille Henry	Physical Modelling. These objects provide real-time simulations, specially physical behaviors. pmpd can be used to create natural dynamic systems, like a bouncing ball, string movement, Brownian movement, chaos, fluid dynamics, sand, gravitation, and more. With pmpd physical dynamics can be modelled without knowing the global equation of the movement. Only the cause of the movement and the involved structure are needed for the simulation. pmpd provides the basic objects for this kind of simulation. Assembling them allows the creation of a very large variety of dynamic systems .
Toolkit	debug: SELECT prenom, nom FROM auteurs RIGHT JOIN auteur_libraries USING (id_auteur) WHERE auteur_libraries.id_library='46'Robin Davis	You can think of these tools as virtual instruments - record your jam sessions, and take out the good bits for use in your music.