Objects			page : 1 2 3 4 5 6 7
flange1~	Abstraction		flanger flange1~ is a simple flanger that is closely related to comb2~. The principal difference is that it uses a variable delay tap. An added parameter controls the portamento time of the resonant frequency when it is changed. This abstraction is intended for use with dynamic parameter changes. As with the comb filter, equally spaced peaks or troughs in the output signal's frequency response are created at each multiple of the peak width (a frequency value in Hz). This is done by adding a slightly delayed version of a signal to itself, which causes regularlyspaced phase cancellation in the signal’s spectrum. Negative values for the intensity parameter cause the center frequency of all peaks to be shifted by half the peak width (i.e. the troughs occur at each multiple of the given width).
flextdelay~	External		Delay signals with a signal as delaytime (in samples) that could be smaller then the vectorsize. With the flextdelay it's like the standard msp delay~ possible to make the delay smaller than the vectorsize, which is not possible with tapin~ and tapout~. But like tapout~ it's also controllable with an audio signal (as number of samples). It's fast, and uses interpolation and an allpass filter.
gem.pix_delay	External
GlitchFilter	Patch		Filters out monophonic notes shorter than a threshold time Filters out monophonic notes shorter than a threshold time. GlitchFilter assumes a monophonic stream of notes, where each note off arrives before the next note on. There is a delay equal to the threshold time before each note is output.
Granular Spatializer	Patch		breaks an incoming stereo source into 4 or 8 grains and allocates each grain to to a particular output channel. In addition, each grain can be given a different delay and/or transposition.
group	External		groups numbers received in succession into a list. groups numbers received in succession into a list. This object is much the same as thresh, except that since it is told how many numbers to wait for, it returns immediately upon receiveing the last one with no time delay. The length of the list to collect is given as an optional argument and in the right inlet. Numbers in the left inlet are collected into a list until the proper number of them has been received, then they are sent out the outlet. 1 comment
group-rhythm	Abstraction		rythm generator Generates a rhythm by choosing elements of a given supply (provided by a geometrical row with its parameters: minimum entry delay, maximum entry delay and number of entry delays) and repeating a chosen value according to the periodicity parameter. This modules incorporates the "Gruppen"-theory of Karlheinz Stockhausen ("...wie die Zeit vergeht...", in: "die reihe", Vol. 3, Vienna 1957) and reflects some considerations of Gottfried Michael Koenig about serialism and aleatory ("Aleatorische und serielle Verfahren in der elektronischen Musik", in: Die Sonde, Vol. 5/1, Bonn 1965).
harmv2~	Abstraction		harmonizer This abstraction provides a basic harmonizer element, which performs real-time transposition of an input audio signal, by constantly alternating, cross-faded, transposed "grains" of the incoming sound. harmv2~ must be used with a tapin~ object and DC filter as shown in the help file (see the MSP manual for details on tapin~, and see adc1~ in this manual for information of the DC filter). The tapin~ is not integrated into the harmv2~ abstraction because multiple harmonizers may share (read from) the same delay memory.
hoa.delay~	Abstraction		An ambisonic harmonic delay. hoa.delay~ allows you to delay the differents harmonics.
hoa.reverberation~	Abstraction		A ambisonic reverberation. hoa.reverberation~ use a algorithm based on feedback network delay and doppler effect to simulate a room reveberation.
Hudak	Standalone Application		long delays of up to 2 minutes. 2 * 3 delay lines per channel. granulator and buffer record/play
idelay~	External		interpolating delay (using flext)
ipoke~	External		ipoke~ is an interpolating buffer~ writer. It can replace the poke~ object in some applications, for instance when all indexes have to be filled, like in a variable sampling-frequency delay. Version 2 has fixed some bugs and is more efficient.
jb.delay	Abstraction		delay for any kind of input, in ms or events
jg.spectdelay~	External		spectral delay jg.spectdelay~ performs an FFT of the input and supplies each frequency band with a volume control (EQ) and a recirculating delay line. EQ gain, delay time, and delay feedback can be controlled in real time. There is a way to apply a value change to a contiguous group of frequency bands. So, for example, you can hook up 16 sliders and control the bands in a way that provides more resolution to lower frequencies than if you merely divided the spectrum into 16 equal parts. GPL-licensed source code is available.
page : 1 2 3 4 5 6 7